News Information
—— NEWS INFORMATION ——
Information Details
The mold changing operation of a CNC bending machine.
Release time:
2023-07-04 15:59
Operation of the mold opening for the entire lower mold of the double V.
In the manual page, give a relatively suitable value to the opening (DY), and appropriately reduce the speed conversion point (the conversion point is usually set higher, WS models are typically set to 60mm, PB models are usually set to 90-100mm, adjust this value according to the height of the upper and lower molds). The bending speed is usually reduced to appropriately increase the Y-axis position value (ensuring that the slider cannot automatically return). First, let the slider descend to a relatively suitable position below the conversion point; use a special chain to suspend both ends of the lower mold from both ends of the slider, and use manual return operation to lift the lower mold; then the operator flips according to the selected mold opening; then let the slider descend to align the upper and lower cutting edges. After the mold change operation is completed, restore the previously modified values to normal.
2. Operation of the mold opening for the lower mold of the double V and the segmented lower mold with lower mold pads.
Manually change to the required mold opening, perform the same operation, and complete the alignment and adjustment of the upper and lower molds.
3. Another adjustment method for changing the lower mold and aligning the cutting edges.
(1) Turn the mode selection button on the electrical cabinet door to the "manual" position.
(2) At this time, switch the CNC system to the manual page, and the word "adjust" appears in the lower right corner of the screen.
(3) Press the soft function key "Manual Position" on the CNC system to enter the handwheel adjustment page.
(4) Move the cursor to the Y-axis position and start the CNC system.
(5) Use a two-handed control operation to move the slider to the speed conversion point.
(6) At this time, keep your foot on the footswitch for the slider's downward movement, and slowly drive the slider up and down with the handwheel to complete the alignment operation.
Previous Page
Previous Page
2024-08-29
Study of Germany's high-end manufacturing industry
2023-11-02
Germany European Machine Tool Exhibition
2023-11-02
2023 Innovation and Entrepreneurship Competition
2023-10-27
Adhere to the principle of "not seeking the dominance of one enterprise, but seeking alliance members to become small giants"
Contact Information
Telephone Hotline:
+8613700647358(Mr. Zhang)
+8618213021054(Mr. Wang)
+8618387332885(Ms. Zhang)
E-mail:13700647358@139.com
Address: Union Avenue, Numerical Control Industrial Park, Yanhe Town, Yuxi City, Yunnan Province
Mobile website
Copyright©2025 Yunnan Runhang Precision Machinery Co., Ltd.
